Halloween Thread

#1,451
#1,451
  • Like
Reactions: Toucan Sam, Behr, 508mikey and 1 other person
#1,452
#1,452
the_todd said:
@larjoranj - as i stated in an earlier post, im changing my decorations up this year. I have a posable skeleton that i want to stand by a grill to look like he’s cooking. Any suggestions on how to keep him standing up/posed?
Click to expand...

Here's the other way I stand up skeletons. Cut a length of pvc pipe, taller if you want him to stand very upright, shorter if you want him to be bent more at the knees. If you're not sure cut it long. You can always shorten it later. You want to attach the pipe to the back of the skeleton ( or in this case Home Depot's Evil Pixie ) in at least 2 places to keep the pipe tight to the skeleton. Use zip ties to attach it. Drill holes thru the pvc - run the zip ties thru the holes and around some part of the skeleton and pull it tight. Depending on the skeleton you are using, the backbone and neck may be curved and the pvc may not fit tight. On this Evil Pixie shown below the neck curved away from the spine a lot so I used my heat gun to bend the pvc to the shape of the prop. I'm able to pull the zip tie tighter and keep the pvc very sturdy. No wobble. Drive some conduit in the ground and slide the pvc over it and the prop will stand. After I decide where to place the prop I'll spray paint the pvc whatever color is in the background. Green grass is showing in this pic so I would paint it green. My house is almost white so If I placed it in front of the house the pipe probably would blend in with the white brick. If you have a red brick house you would match that and the pipe will be barely visible during the day and not at all at night.

evil pixie 2.jpg
evil pixie 1a.jpg
 
  • Like
Reactions: bigorangewildcat, the_todd, Hoosier_Vol and 2 others
#1,453
#1,453
larjoranj said:
Here's the other way I stand up skeletons. Cut a length of pvc pipe, taller if you want him to stand very upright, shorter if you want him to be bent more at the knees. If you're not sure cut it long. You can always shorten it later. You want to attach the pipe to the back of the skeleton ( or in this case Home Depot's Evil Pixie ) in at least 2 places to keep the pipe tight to the skeleton. Use zip ties to attach it. Drill holes thru the pvc - run the zip ties thru the holes and around some part of the skeleton and pull it tight. Depending on the skeleton you are using, the backbone and neck may be curved and the pvc may not fit tight. On this Evil Pixie shown below the neck curved away from the spine a lot so I used my heat gun to bend the pvc to the shape of the prop. I'm able to pull the zip tie tighter and keep the pvc very sturdy. No wobble. Drive some conduit in the ground and slide the pvc over it and the prop will stand. After I decide where to place the prop I'll spray paint the pvc whatever color is in the background. Green grass is showing in this pic so I would paint it green. My house is almost white so If I placed it in front of the house the pipe probably would blend in with the white brick. If you have a red brick house you would match that and the pipe will be barely visible during the day and not at all at night.

View attachment 776514
View attachment 776516
Click to expand...
I mean from a front view it looks like he got a PVC tube in his ass
that'd give anybody a pissed off look, except maybe @Souce
Oh lowered
Edit: Need to find a way to put that dam hammer in his hand
 
  • Like
Reactions: Nooga, larjoranj and malinoisvol
#1,456
#1,456
larjoranj said:
Here's the other way I stand up skeletons. Cut a length of pvc pipe, taller if you want him to stand very upright, shorter if you want him to be bent more at the knees. If you're not sure cut it long. You can always shorten it later. You want to attach the pipe to the back of the skeleton ( or in this case Home Depot's Evil Pixie ) in at least 2 places to keep the pipe tight to the skeleton. Use zip ties to attach it. Drill holes thru the pvc - run the zip ties thru the holes and around some part of the skeleton and pull it tight. Depending on the skeleton you are using, the backbone and neck may be curved and the pvc may not fit tight. On this Evil Pixie shown below the neck curved away from the spine a lot so I used my heat gun to bend the pvc to the shape of the prop. I'm able to pull the zip tie tighter and keep the pvc very sturdy. No wobble. Drive some conduit in the ground and slide the pvc over it and the prop will stand. After I decide where to place the prop I'll spray paint the pvc whatever color is in the background. Green grass is showing in this pic so I would paint it green. My house is almost white so If I placed it in front of the house the pipe probably would blend in with the white brick. If you have a red brick house you would match that and the pipe will be barely visible during the day and not at all at night.

View attachment 776514
View attachment 776516
Click to expand...
Have you done The Wolf man ?
 
#1,463
#1,463
larjoranj said:
Here's the other way I stand up skeletons. Cut a length of pvc pipe, taller if you want him to stand very upright, shorter if you want him to be bent more at the knees. If you're not sure cut it long. You can always shorten it later. You want to attach the pipe to the back of the skeleton ( or in this case Home Depot's Evil Pixie ) in at least 2 places to keep the pipe tight to the skeleton. Use zip ties to attach it. Drill holes thru the pvc - run the zip ties thru the holes and around some part of the skeleton and pull it tight. Depending on the skeleton you are using, the backbone and neck may be curved and the pvc may not fit tight. On this Evil Pixie shown below the neck curved away from the spine a lot so I used my heat gun to bend the pvc to the shape of the prop. I'm able to pull the zip tie tighter and keep the pvc very sturdy. No wobble. Drive some conduit in the ground and slide the pvc over it and the prop will stand. After I decide where to place the prop I'll spray paint the pvc whatever color is in the background. Green grass is showing in this pic so I would paint it green. My house is almost white so If I placed it in front of the house the pipe probably would blend in with the white brick. If you have a red brick house you would match that and the pipe will be barely visible during the day and not at all at night.

View attachment 776514
View attachment 776516
Click to expand...
Thanks for all the advice. Ive got the posable skeletons, so everything you suggested should work
 
New posts
You must log in or register to reply here.
Advertisement





Back
Top