Random Thoughts XXIX

Status
Not open for further replies.
This is the worst idea ever.

Why do people speak in absolutes? I can think of worse ideas so it is not the worst idea ever. Anything involving the mutilation of your man parts would be worse. I'd rather be dead than separated from Big Pete and the Wonder Twins.
 
Why do people speak in absolutes? I can think of worse ideas so it is not the worst idea ever. Anything involving the mutilation of your man parts would be worse. I'd rather be dead than separated from Big Pete and the Wonder Twins.

So one of your testicles is a chick?
 
Sly I have looked all over and nothing tells me where the starter is located on your car. My best guess is under the plastic top cover near the manifold. The only diagram I could find was pathetic, but it looked like it was right next to a spark plug and possibly on the right side of the motor. I don't think you would need to reach it under the car.

Just find where the block and transmission meet. It will be on the tranny case near there.
 
Sly. What buick do you have? Sorry if i missed it. I just saw where you said buick.. I can pull up diagrams here at work if you'd like.
 
Why do people speak in absolutes? I can think of worse ideas so it is not the worst idea ever. Anything involving the mutilation of your man parts would be worse. I'd rather be dead than separated from Big Pete and the Wonder Twins.

Mostly because Hobock said it and he doesn't understand the art of inane conversation and the comedy it can provide.
 
Incase it is the starter and you want to replace yourself.



STARTER MOTOR REPLACEMENT

REMOVAL PROCEDURE


91345426



  1. Disconnect the battery negative cable.
  2. Raise and support the vehicle.
  3. Remove the torque convener cover.
  4. Disconnect the battery positive cable from the starter.
  5. Disconnect the wire from the solenoid S terminal on the starter.
91345427


  1. Remove the 2 starter motor mounting bolts.
  2. Remove the starter motor.
INSTALLATION PROCEDURE

91345427


  1. Install the starter motor. NOTE: Refer to Fastener Notice in Service Precautions.
  2. Install the starter motor mounting bolts. Tighten Tighten the starter motor mounting bolts to 43 N.m (32 lb ft ).
91345426


  1. Connect the battery positive cable to the starter. Tighten Tighten the battery positive cable to the starter nut to 10 N.m (89 lb in ).
  2. Connect the starter motor S terminal wire. Tighten Tighten the solenoid S terminal nut to 2.5 N.m (22 lb in ).
  3. Install the torque converter cover.
  4. Lower the vehicle.
  5. Connect the battery negative cable.
 
Status
Not open for further replies.
Advertisement

Back
Top