Vols Themed Outdoor Furniture

#27
#27
I actually could put a small cooler where the table is
One suggestion I could give as a woodworker of sorts would be to make a crosscut on the table about 6 inches from the front and hinge it at the back. If you then brace it and create a "basket" for the back hinged portion, a small styrofoam cooler would work. You could then make cutouts in the front 6 inch section for cup/can holders. I hope that makes sense.
 
  • Like
Reactions: SicEmSmokey33
#28
#28
One suggestion I could give as a woodworker of sorts would be to make a crosscut on the table about 6 inches from the front and hinge it at the back. If you then brace it and create a "basket" for the back hinged portion, a small styrofoam cooler would work. You could then make cutouts in the front 6 inch section for cup/can holders. I hope that makes sense.
Yes, thanks for the tip. I think I could pull it off.
 
  • Like
Reactions: peerless98
Advertisement



Back
Top